Five star heavy industry on mortar wall rolling of crusher

Explanation on mortar wall rolling of Wuxing heavy industry

The application of cone crusher in actual production is gradually increasing. In order to better guarantee the actual production market demand, we should pay attention to the use of wear-resistant materials for production, so as to better guarantee the practical application. Crushing wall and mortar rolling wall are the most important wear-resistant parts of cone crusher. When choosing a suitable cone crusher, the most important thing is to select a good crushing wall and mortar rolling wall, which can save a lot of cost.

What material is the most wear-resistant mortar wall / broken wall? What are the wear-resistant mortar wall / broken wall manufacturers in Hunan? How to improve the service life of wear-resistant mortar wall / broken wall? What are the wear-resistant mortar wall / crushing wall of cone crusher? How to choose the material of mortar rolling wall / broken wall of crusher? How much is the price of wear-resistant mortar wall / broken wall of crusher? What are the wear-resistant parts of cone crusher We are often asked about the above questions. Here are the answers given by Hunan Xiangjian technical experts

Product introduction:

Cone crusher is mainly used in metallurgy, construction, mining and other industries, and can be used as secondary crushing or tertiary crushing. In the working process, the motor drives the eccentric sleeve to rotate through the transmission device, and the moving cone (broken wall) rotates and swings under the forced action of the eccentric shaft sleeve. The section where the moving cone (broken wall) is close to the static cone (also known as the fixed cone and the rolling mortar wall) is the crushing cavity. The material is crushed by the repeated extrusion and impact of the dynamic cone (broken wall) and the static cone (mortar wall). When the moving cone (broken wall) leaves the section, the material that has been broken to the required size falls under the action of its own gravity and is discharged from the bottom of the cone. The material to be crushed is loaded from the feed port of the cone crusher. However, due to a series of reasons, such as bad working conditions and long working hours, the wear of cone breaking is also very serious. The mortar rolling wall and broken wall are important wear-resistant parts. If the worn mortar wall and broken wall are not replaced in time, the normal operation of the machine will be affected, resulting in production stop, and the loss to the industry is immeasurable. However, the mortar wall is very easy to grind How to reduce the wear of damaged parts under high-strength working load, so as to prolong the service life of the broken wall of mortar wall, reduce the production cost and improve the economic benefits of the manufacturer?

Shuangfeng County Construction Machinery Co., Ltd. produces mortar rolling wall and broken wall material. Modified high manganese steel and super strengthened high manganese steel are used in the process of use, which will not crack or fracture. At the same time, the obvious hardening effect occurs after the impact of materials, and the hardness is increased rapidly, which effectively ensures the wear resistance. The service life is 30-50% longer than that of traditional high manganese steel.

Shuangfeng County Construction Machinery Co., Ltd. has developed a new type of compound mortar wall and broken wall, which is cast with high-performance new composite materials. Tungsten titanium alloy with dense and extremely strong toughness and hardness second to diamond is cast on high manganese steel matrix, so as to resist the wear-resistance of materials and greatly improve the service performance of wear resistance. Compared with ordinary mortar rolling wall and broken wall, its service life is longer Life increased by more than 3 times, which solved the problem of frequent replacement of wear-resistant parts by customers, which not only improved the production efficiency, but also solved the investment cost. The new compound mortar wall and broken wall produced by our company are most suitable for crushing hard and strong abrasive materials, especially in the production environment with extremely bad industrial and mining conditions, strong abrasion resistance and high production intensity, and the wear resistance is more obvious. The overall wear resistance has been improved rapidly, which can guarantee the rapid development of the whole enterprise more comprehensively, and also bring better benefits for the enterprise.